Automated scoring and augmented reality visualization software program for evaluating tooth preparations.

STATEMENT OF PROBLEM: Tooth preparation is an essential part of prosthetic dentistry; however, traditional evaluation methods involve subjective visual inspection that is prone to examiner variability. PURPOSE: The purpose of this study was to investigate a newly developed automated scoring and augmented reality (ASAR) visualization software program for evaluating tooth preparations. MATERIAL AND METHODS: A total of 122 tooth models (61 anterior and 61 posterior teeth) prepared by dental students were evaluated by using visual assessments that were conducted by students and an expert, and auto assessment that was performed with an ASAR software program by using a 3-dimensional (3D) point-cloud comparison method. The software program offered comprehensive functions, including generating detailed reports for individual test models, producing a simultaneous summary score report for all tested models, creating 3D color-coded deviation maps, and forming augmented reality quick-response (AR-QR) codes for online data storage with AR visualization. The reliability and efficiency of the evaluation methods were measured by comparing tooth preparation assessment scores and evaluation time. The data underwent statistical analysis using the Kruskal-Wallis test, followed by Mann-Whitney U tests for pairwise comparisons adjusted with the Benjamini-Hochberg method (α=.05). RESULTS: Significant differences were found across the evaluation methods and tooth types in terms of preparation scores and evaluation time (P<.001). A significant difference was observed between the auto- and student self-assessment methods (P<.001) in scoring both the anterior and posterior tooth preparations. However, no significant difference was found between the auto- and expert-assessment methods for the anterior (P=.085) or posterior (P=.14) tooth preparation scores. Notably, the auto-assessment method required significantly shorter time than the expert- and self-assessment methods (P<.001) for both tooth types. Additionally, significant differences in evaluation time between the anterior and posterior tooth were observed in both self- and expert-assessment methods (P<.001), whereas the evaluation times for both the tooth types with the auto-assessment method were statistically similar (P=.32). CONCLUSIONS: ASAR-based evaluation is comparable with expert-assessment while exhibiting significantly higher time efficiency. Moreover, AR-QR codes enhance learning and training experiences by facilitating online data storage and AR visualization.

Effectiveness of virtual reality interactive simulation practice in prosthodontic education: A systematic review and meta-analysis.

INTRODUCTION: Virtual reality-based interactive simulation (VRIS) provides a safe and controlled environment for dental students and professionals to develop skills and knowledge. This study aimed to investigate the effectiveness of using the VRIS for prosthodontic practice and to explore the trends, application areas, and users' attitudes towards VRIS. MATERIALS AND METHODS: This review followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines for searching studies published until 21 March 2023 that reported quantitative or qualitative learning outcomes related to the use of VRIS for dental prosthodontic practice and clinical training. The quality of the included studies was assessed using the Medical Education Research Study Quality Instrument (MERSQI) and Newcastle-Ottawa Scale-Education (NOS-E) tools. A random-effects meta-analysis was conducted to compare the intervention group (utilizing VRIS) and the control group (employing conventional prosthodontic training methods) based on performance skill scores and task completion time, with a significance level set at <.05. RESULTS: The meta-analysis revealed that the utilization of VRIS generally improves students' performance scores (SMD = 1.04; 95% CI, -0.35 to 2.44; I2 > 50%; p = .13) and reduces task completion time (SMD = -0.03; 95% CI, 1.39-7.72; I2 > 50%; p = .93). Notably, using VRIS significantly enhanced the performance scores in implant surgery practice (SMD = 0.26; 95% CI, 0.09-0.42; p < .05). Additionally, the VRIS method significantly reduced task completion time in the cavity restorative preparation task (SMD = -1.19; 95% CI, -1.85 to -0.53; p < .05). CONCLUSION: Engaging in practice with VRIS has the potential to enhance learning proficiency in prosthodontic education. The advantages associated with VRIS encompass the provision of immediate feedback, decreased task completion time, heightened confidence and motivation, accelerated skill acquisition, improved performance scores, and increased learning engagement.

Mucormycosis of the Mandible and Tongue: A Systematic Scoping Review.

AIM: Mucormycosis is a rare human infection associated with Mucorales, a group of filamentous moulds found in different environmental niches. Its oral manifestations may occur in the mandible and tongue despite being rare. We aimed to systematically review the data on clinical manifestations, risk factors, diagnostic approaches, treatment options, and outcomes of mandibular and tongue mucormycosis. METHODS: An electronic search of articles published between January 1975 and November 2022 in PubMed, Web of Science, and EMBASE databases was performed. A total of 22 articles met the inclusion criteria and reported 27 cases of oral mucormycosis in total. RESULTS: Fourteen patients had mandibular mucormycosis signs unrelated to COVID-19 infection, 6 had SARS-CoV-2-related mandibular mucormycosis, and 6 had manifestations in the tongue. All published case reports during the COVID-19 pandemic were from India. Patient ages ranged from 4 months old to 82 years, and most patients had important comorbidities, such as blood dyscrasias related to immune deficiency and uncontrolled type 2 diabetes mellitus. The signs and symptoms of mandibular and tongue mucormycosis varied from dental pain, loose teeth, and nonhealing sockets to dysphagia and paraesthesia of the lip. Some patients also reported trismus, draining sinus tract, and facial pain. The diagnosis of oral mucormycosis was based on a combination of clinical, radiographic, and histopathologic findings by demonstrating fungal hyphae in tissue specimens. In most cases, mucormycosis was managed with systemic amphotericin B, strict glycaemic control, and aggressive surgical debridement of infected tissue, minimising the progression of the fungal infection and thus improving the survival rate. In some cases, combined antifungal therapy, antibiotic therapy, and chlorhexidine mouthwashes were used successfully. CONCLUSIONS: Recognition of the signs and symptoms by oral care providers is pertinent for the early diagnosis and treatment of tongue and mandibular mucormycosis, and providers should be aware of the possibility of this opportunistic fungal infection in patients with COVID-19. A multidisciplinary approach is recommended for the management of this lethal infection.

Diversity of site-specific microbes of occlusal and proximal lesions in severe- early childhood caries (S-ECC).

BACKGROUND: Severe-early childhood caries (S-ECC) a global problem of significant concern, commonly manifest on the occlusal, and proximal surfaces of affected teeth. Despite the major ecological differences between these two niches the compositional differences, if any, in the microbiota of such lesions is unknown. METHODS: Deep-dentine caries samples from asymptomatic primary molars of children with S-ECC (n 19) belonging to caries-code 5/6, (ICDAS classification) were evaluated. Employing two primer pools, we amplified and compared the bacterial 16S rRNA gene sequences of the seven hypervariable regions (V2-V4 and V6-V9) using NGS-based assay. RESULTS: Bray-Curtisevaluation indicated that occlusal lesions (OL) had a more homogeneous community than the proximal lesions (PL) with significant compositional differences at the species level (p = 0.01; R- 0.513). Together, the occlusal and proximal niches harbored 263 species, of which 202 (76.8%) species were common to both , while 49 (18.6%) and 12 (4.6%) disparate species were exclusively isolated from the proximal and occlusal niches, respectively. The most commonl genera at both niches included Streptococcus, Prevotella, and Lactobacillus. S. mutans was predominant in PL (p ≤ 0.05), and Atopobium parvulum (p = 0.01) was predominant in OL. CONCLUSIONS: Distinct differences exist between the caries microbiota of occlusal and proximal caries in S-ECC.

Attributes of dysgeusia and anosmia of coronavirus disease 2019 (COVID-19) in hospitalized patients.

OBJECTIVES: While chemosensory dysfunctions, dysgeusia and anosmia/hyposmia, are recognized as distinctive symptoms of COVID-19, their temporality of presentation and association with the patient age, gender, disease severity, and comorbidities has been sparsely studied. Hence, we evaluated the latter associations of chemosensory dysfunction, in hospitalized COVID-19 patients in the United Arab Emirates (UAE). MATERIALS AND METHODS: Information on chemosensory dysfunction and history of chronic systemic comorbidities, if any, was obtained from 149 COVID-19 patients in an infectious disease hospital in UAE, using their medical records, as well as from a face-to-face questionnaire survey. Additionally, a modified SNOT-22 questionnaire that measures disease-specific quality of life in patients with upper respiratory tract affections was also administered. RESULTS: Chemosensory dysfunction was reported by 94.6% of the cohort, and anosmia with dysgeusia was significantly more in males than females with severe COVID-19. Males with moderate COVID-19 and systemic comorbidities were more likely to present with chemosensory dysfunction in comparison with females. SNOT-22 questionnaire revealed that nasal blockage and runny nose were more prevalent in mild/moderate, than in the severe, state of COVID-19. CONCLUSION: Our data confirm the commonality of chemosensory dysfunction during COVID-19 progression, and the significantly more pronounced combined dysfunction in males with severe COVID-19, and comorbidities.

Profuse diversity and acidogenicity of the candida-biome of deep carious lesions of Severe Early Childhood Caries (S-ECC).

Introduction: The retentive niches of deep caries lesions have a distinct biome. Methods: We evaluated the site-specific (occlusal and proximal) Candida-biome of Severe-Early Childhood Caries (S-ECC) in 66- children (132 lesions). Asymptomatic primary molars fitting the definition of the International Caries Detection and Assessment-(ICDAS)-caries-code 5/6 were analyzed. Deep-dentinal sampling and simultaneous assessment of pH were performed. Clinical isolates were speciated using multiplex-PCR and evaluated for their acidogenic and aciduric potential.Results: Surprisingly, a high prevalence of Candida species (72.7%), either singly or in combination, was noted from both the proximal and occlusal cavities. C. tropicalis was the most prevalent species (47%; 34/72), followed by C. krusei (43.1%; 31/72) and C. albicans (40.3%; 29/72), with C. glabrata being the least (9.7%; 7/72). Over 45% low-pH niches (pH <7) of both sites yielded either dual or triple species of Candida. Genotyping revealed three distinct C. albicans genotypes (A, B, and C) with (14/29; 48.3%) of strains belonging to Genotype A. All four evaluated Candida species exhibited acidogenic and aciduric potential, C. tropicalis being the most potent.Conclusion: This, the first report of the high-density, multispecies, yeast colonization of deep-dentinal lesions in S-ECC, suggests that the Candida-biome plays a significant etiologic role in the condition, possibly due to their profound acidogenicity in milieus rich in dietary carbohydrates.

The effect of the combined use of silver diamine fluoride and potassium iodide in disrupting the plaque biofilm microbiome and alleviating tooth discoloration: A systematic review.

Silver diamine fluoride (SDF) is used in minimally invasive dentistry for arresting dental caries. However, discoloration of teeth is a significant side effect that has limited the use of SDF. Hence, the application of potassium iodide (KI) following SDF has been proposed to ameliorate the staining. Although antimicrobial activity is one of the major mechanisms of the caries-arresting effect of SDF, the antimicrobial potency of SDF/KI combination is unclear. Thus, the primary objective of this systematic review was to appraise the studies on the antimicrobial efficacy of SDF/KI combination on cariogenic microbes. The secondary objective was to summarize the evidence on the potential of KI in reducing the discoloration associated with the application of SDF. Electronic databases of Medline via PubMed, Cochrane Library, Web of Science, and EBSCO host were searched for English language manuscripts from January 2005 to 15th November 2020. The reference lists of these manuscripts were manually searched for additional studies. Twelve studies were included in the final analysis, seven of which have investigated the antimicrobial efficacy of SDF/KI, and the rest have examined the anti-staining potential of KI. The exploratory findings from the reviewed articles revealed the promising antimicrobial potential of SDF/KI on cariogenic microbes associated with dentine caries. There is, however, contradictory evidence on the effect of SDF/KI on tooth color. The reviewed in-vitro studies indicated significant effectiveness of KI in preventing staining. A clinical trial on primary dentition showed 25% reduction in the incidence of staining by SDF after applying KI, while a clinical study on root caries in adults showed no significant effect. Within the methodological limitations of this review, we conclude that for arresting dental caries, SDF could be combined with KI, as there may be a lower likelihood of staining. Further, well-designed clinical trials on the antimicrobial and anti-staining effect of SDF/KI are needed to obtain more robust evidence.

Consensus on glass-ionomer cement thresholds for restorative indications.

OBJECTIVE: The aim of this paper is to present the results of a consensus meeting on the threshold property requirements for the clinical use of conventional glass-ionomer cements (GICs) for restorative indications. METHODS: Twenty-one experts on GICs evaluated the results of tests on mechanical and optical properties of 18 different brands of restorative GICs: Bioglass R [B], Chemfil Rock [CR], Equia Forte [EF], Gold Label 2 [GL2], Gold Label 9 [GL9], Glass Ionomer Cement II [GI], Ionglass [IG], Ion Z [IZ], Ionomaster [IM], Ionofil Plus [IP], Ionostar Plus [IS], Ketac Molar Easymix [KM], Magic Glass [MG], Maxxion R [MA], Riva Self Cure [R], Vidrion R [V], Vitro Fil [VF] and Vitro Molar [VM]. All experiments were carried out by a team of researchers from Brazil and England following strict protocols, under the same laboratory conditions throughout, and maintaining data integrity. RESULTS: There was consensus on: determining as primary properties of the material: compressive strength, microhardness, acid erosion and fluoride release, and as secondary properties: contrast ratio and translucency parameter, in order to rank the materials. Seven brands were below the thresholds for restorative indications: IZ, IM, IG, MA, VF, B and MG. CONCLUSIONS: Based on the primary properties adopted as being essential for restorative indications, the conventional restorative GICs that met the thresholds and could be considered suitable as long-term restorative materials were: EF, GI, GL9, KM, IP, GL2, IS, CR, V, VM and R. A decision-making process to select the best GIC must also include results from clinical trials. CLINICAL SIGNIFICANCE: This study provides a ranking of GICs that could be considered suitable as long-term restorative materials based on their main properties.

The effectiveness and efficacy of respiratory protective equipment (RPE) in dentistry and other health care settings: a systematic review.

OBJECTIVE: The global pandemic of coronavirus disease-19, caused by the Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2), is the latest hazard facing healthcare workers (HCW) including dental care workers (DCW). It is clear that the major mode of SARS-CoV-2 transmission is the airborne route, through inhalation of virus-infested aerosols and droplets. Several respiratory protection equipment (RPE), including masks, face shields/visors, and respirators, are available to obviate facial and conjunctival contamination by microbes. However, as their barrier value against microbial inhalation has not been evaluated, we systematically reviewed the data on the effectiveness and efficacy of facemasks and respirators, including protective eyewear, with particular emphasis on dental healthcare. MATERIAL AND METHODS: PubMed, MEDLINE, the Cochrane Library, and Embase databases were searched between 01January 1990 and 15 May 2020. RESULTS: Of 310 identified English language records, 21 were included as per eligibility criteria. In clinical terms, wearing layered, face-fitting masks/respirators and protective-eyewear can limit the spread of infection among HCWs. Specifically, combined interventions such as a face mask and a face shield, better resist bioaerosol inhalation than either alone. The prolonged and over-extended use of surgical masks compromise their effectiveness. CONCLUSIONS: In general, RPE is effective as a barrier protection against aerosolized microbes in healthcare settings. But their filtration efficacy is compromised by the (i) inhalant particle size, (ii) airflow dynamics, (iii) mask-fit factor, (iv) period of wear, (v) 'wetness' of the masks, and (vi) their fabrication quality. The macro-data presented here should inform policy formulation on RPE wear amongst HCWs.

Clinical efficacy and the antimicrobial potential of silver formulations in arresting dental caries: a systematic review.

BACKGROUND: The use of silver-formulation as microbicide to arrest dentinal caries is gaining popularity. The primary objective of the present appraisal was to systematically review the clinical (in vivo) applications and antimicrobial potential of silver-containing formulations in arresting dentinal caries. Our secondary aim was to sum up the available in vitro applications of silver-containing formulations against cariogenic microbes isolated from dentine lesions. METHODS: Ovid MEDLINE, EBSCO host, Web of Science, and Cochrane Library databases was searched between January 2009-May 2019. RESULTS: In vivo: We observed conflicting evidence of antimicrobial efficacy of SDF on a diverse array of microbial taxa present in carious dentine of primary and permanent teeth. Moreover, there is insufficient evidence on the application of AgNP-fluoride as an effective microbicidal against cariogens of dentine lesions. In vitro: We found a good evidence of microbicidal efficacy of silver diamine fluoride (SDF) on selective cariogenic microbes in human dentine model. Additionally, a good evidence was noted of in vitro application of silver nanoparticles (AgNPs) as a useful microbicidal against S. mutans adhesion, growth and subsequent biofilm formation in human dentine models. CONCLUSIONS: Taken together, in vitro evidence indicates the promising antimicrobial potential of silver-based formulations (SDF and nanosilver) against the predominant cariogenic flora, particularly from dentine lesions. Post-treatment clinical data of either the bactericidal and bacteriostatic effects of SDF or nanosilver are sparse. Furthermore, the current understanding of the specific size, concentration, antimicrobial mechanisms, and toxicological aspects of nano-silver compounds is inadequate to draw firm conclusions on their clinical utility.

Intra- and inter-brand color differences of denture teeth under different illuminations.

Debonding, staining and wear are usually the reasons for denture teeth replacement by new ones from same or different brands. Objective This study investigates the possible differences in color of denture teeth of the same or different brands under different illuminations, since their metameric behavior in color under specific illumination may become unacceptable. Methodology For the purpose of this study, 10 denture teeth (#11), shade A3, of 4 different brands were selected (Creopal/KlemaDental Pro, Executive/DeguDent, Cosmo HXL/DeguDent, Ivostar/Ivoclar-Vivadent). Teeth stabilized in white silicone mold and the CIELAB color coordinates of their labial surface under 3 different illumination lights (D65, F2, A) were recorded, using a portable colorimeter (FRU/WR-18, Wave Inc). ΔE*ab values of all possible pairs of teeth of the same brand (n=45) or pair combinations of different brands (n=100) under each illumination light, in a dry and wet state were calculated. Data were analyzed statistically using 3-way ANOVA, Friedman's and Wilcoxon's tests at a significance level of α=0.05. Results The results showed that brand type affected significantly L*, a* and b* coordinates (p<0.0001), illumination a* and b* coordinates (p<0.0001), but none of them was affected by the hydration state of teeth (p>0.05). Intra-brand color differences ranged between 0.21-0.78ΔΕ* units with significant differences among brands (p<0.0001), among illumination lights (p<0.0001) and between hydration states (p=0.0001). Inter-brand differences ranged between 2.29-6.29ΔΕ* units with significant differences among pairs of brands (p<0.0001), illumination lights (p<0.0001) and hydration states (p<0.0001). Conclusions Differences were found between and within brands under D65 illumination which increased under F2 or A illumination affected by brand type and hydration status. Executive was the most stable brand than the others under different illuminations or wet states and for this reason its difference from other brands is the lowest. In clinical practice, there should be no blending of teeth of different brands but if we must, we should select those that are more stable under different illuminations.

Silver diamine fluoride (SDF) used in childhood caries management has potent antifungal activity against oral Candida species.

BACKGROUND: The microbiome of Severe-Early Childhood Caries (S-ECC), is characterized by an ecosystem comprising bacterial and fungal species, with a predominance of Candida species. Hence, an anti-cariogen effective against both bacteria and fungi would be valuable in the management of S-ECC. Here we evaluate the antifungal effect of silver diamine fluoride (SDF) against 35-clinical yeast isolates (Ten-each of C. albicans, C. krusei, C. tropicalis and five C. glabrata strains) from dentinal caries-lesions from S-ECC. RESULTS: Disc-diffusion and time-kill assays as well as MIC50 and MIC90 evaluations against therapeutic concentrations confirmed the broad-spectrum anti-candidal potency of SDF. Ultrastructural images revealed morphologic aberrations of yeast-cell walls on exposure to SDF. All C. krusei and C. glabrata isolates were significantly more sensitive to SDF, relative to the standard antifungal fluconazole. Further, SDF appears to effectively abrogate filamentation of C. albicans even at very low concentrations. CONCLUSIONS: Our data, for the first time, elucidate the antifungal potency of SDF, in addition to its known antibacterial activity, in the management of S-ECC.

Intra- and inter-brand color differences of denture teeth under different illuminations

Abstract Debonding, staining and wear are usually the reasons for denture teeth replacement by new ones from same or different brands. Objective This study investigates the possible differences in color of denture teeth of the same or different brands under different illuminations, since their metameric behavior in color under specific illumination may become unacceptable. Methodology For the purpose of this study, 10 denture teeth (#11), shade A3, of 4 different brands were selected (Creopal/KlemaDental Pro, Executive/DeguDent, Cosmo HXL/DeguDent, Ivostar/Ivoclar-Vivadent). Teeth stabilized in white silicone mold and the CIELAB color coordinates of their labial surface under 3 different illumination lights (D65, F2, A) were recorded, using a portable colorimeter (FRU/WR-18, Wave Inc). ΔE*ab values of all possible pairs of teeth of the same brand (n=45) or pair combinations of different brands (n=100) under each illumination light, in a dry and wet state were calculated. Data were analyzed statistically using 3-way ANOVA, Friedman's and Wilcoxon's tests at a significance level of α=0.05. Results The results showed that brand type affected significantly L*, a* and b* coordinates (p<0.0001), illumination a* and b* coordinates (p<0.0001), but none of them was affected by the hydration state of teeth (p>0.05). Intra-brand color differences ranged between 0.21-0.78ΔΕ* units with significant differences among brands (p<0.0001), among illumination lights (p<0.0001) and between hydration states (p=0.0001). Inter-brand differences ranged between 2.29-6.29ΔΕ* units with significant differences among pairs of brands (p<0.0001), illumination lights (p<0.0001) and hydration states (p<0.0001). Conclusions Differences were found between and within brands under D65 illumination which increased under F2 or A illumination affected by brand type and hydration status. Executive was the most stable brand than the others under different illuminations or wet states and for this reason its difference from other brands is the lowest. In clinical practice, there should be no blending of teeth of different brands but if we must, we should select those that are more stable under different illuminations

Evaluation of a Realistic Cleansing Protocol for Preventing Discoloration of Denture Resins.

PURPOSE: To evaluate the efficacy of a realistic staining/cleansing protocol for long-term prevention of discoloration of denture base resins. MATERIALS AND METHODS: Sixty discs (20 × 2.5 mm) of auto- and heat-polymerizing denture acrylic resins were fabricated following manufacturer's instructions, polished on one side and stored in water (37°C) for 24 hours before they were assigned randomly into 6 groups (3 for each material, n = 10) to receive 220 cycles of three immersion protocols. Group A was immersed in the following baths: (1) filtered coffee at 45°C for 2 minutes, (2) tap water at 24°C for 20 seconds, (3) as bath 1, (4) as bath 2, (5) Corega Extradent cleansing solution at 45°C for 3 minutes, and (6) water at 24°C for 20 seconds. Group B was immersed in the four first baths of group A (without cleansing action) and group C in bath 1 for the cumulative action of 20 cycles (80 minutes in 45°C coffee) and bath 2 for 40 seconds. A noncontact optical interferometric profilometer was used for qualitative evaluation of the specimens and a contact colorimeter to estimate color change values (ΔΕ*ab) at baseline and every 20 cycles in the baths for a total of 220 cycles. Data were statistically analyzed using a 2-way-repeated measures ANOVA with Bonferoni multiple comparisons and trend analysis at α = 0.05 level of significance. RESULTS: Data indicated changes in color from 1.7 to 14.2 ΔΕ*ab units. The highest values were related to the number of cycles and group B immersion protocol. Significant differences were found among immersion protocols (p < 0.001) and immersion cycles (p < 0.001) with a significant interaction between protocols and cycles (p < 0.001) but not between denture resins (p = 0.991). CONCLUSION: The evaluated protocol A was found effective in preventing color changes in both denture resins even after a long period of action. Protocol C had a much lower staining effect on both resins than protocol B and behaved similarly to protocol A until 140 to 160 cycles. Therefore, it is probably not appropriate for use in short-term color stability experiments.

Cariogenic microbiome and microbiota of the early primary dentition: A contemporary overview.

Recent advances in the field of molecular microbiology provide an unprecedented opportunity to decipher the vast diversity of the oral microbiome in health and disease. Here, we provide a contemporary overview of the oral microbiome and the microbiota of early childhood caries (ECC) with particular reference to newer analytical techniques. A MEDLINE search revealed a total of 20 metagenomic studies describing cariogenic microbiomes of ECC, 10 of which also detailed the healthy microbiomes. In addition, seven studies on site-specific microbiomes, focusing on acidogenic and aciduric microbiota of deep-dentinal lesions, were also reviewed. These studies evaluated plaque and saliva of children aged 1.5-11 years, in cohorts of 12-485 individuals. These studies reveal a very rich and diverse microbial communities, with hundreds of different phylotypes and microbial species, including novel species and phyla such as Scardovia wiggsiae, Slackia exigua, Granulicatella elegans, Firmicutes in the plaque biofilms of children with ECC. On the contrary, bacteria such as Streptococcus cristatus, S. gordonii, S. sanguinis, Corynebacterium matruchotii, and Neisseria flavescens were common in plaque biofilm of noncarious, healthy, tooth surfaces in subjects with caries. The review illustrates the immense complexity and the diversity of the human oral microbiota of the cariogenic plaque microbiome in ECC, and the daunting prospect of its demystification.

Long-term microwaving of denture base materials: effects on dimensional, color and translucency stability.

INTRODUCTION: While the combined effect of microwave irradiation with cleansing solutions on denture base materials has been investigated, the effects of only using microwave irradiation and, more importantly, in a long-term basis, was not studied yet. OBJECTIVE: The purpose of this study was to evaluate the effect of a long-term repeated microwaving on the dimensional, color and translucency stability of acrylic and polyamide denture base materials. MATERIAL AND METHODS: Thirty two specimens (32 mm x 10 mm x 2.5 mm) from polyamide (Valplast) and PMMA (Vertex Rapid Simplified) denture base materials were made. Eight specimens from each material were immersed in distilled water (control) and 8 were subjected to microwave exposure at 450 W for 3 minutes for a period simulating 224 days of daily disinfection. Linear dimension, color change (ΔE*) and translucency parameter (TP) were measured at baseline and after certain intervals up to 224 cycles of immersion, using a digital calliper and a portable colorimeter. The results were analysed using two-way repeated measures ANOVA to estimate possible differences among predetermined cycles and material type. Regression analysis was also performed to estimate the trend of changes with time. Statistical evaluations performed at a significance level of 5%. RESULTS: Data analysis showed significant changes in length at baseline with an increasing number of cycles (p<0.05) and a significant interaction of cycle-material (p<0.001). The ΔΕ* parameter was significantly higher with a higher number of cycles (p<0.001), but it did not vary between materials (p>0.05). TP decreased similarly in both materials following microwave action but in a significantly higher level for Valplast (p<0.001). CONCLUSIONS: The results indicated that long-term repeated microwaving affects linear dimensional, color and translucency changes of both materials. Differences between PMMA and polyamide material were noted only in dimension and translucency changes.

Long-term microwaving of denture base materials: effects on dimensional, color and translucency stability

Abstract While the combined effect of microwave irradiation with cleansing solutions on denture base materials has been investigated, the effects of only using microwave irradiation and, more importantly, in a long-term basis, was not studied yet. Objective The purpose of this study was to evaluate the effect of a long-term repeated microwaving on the dimensional, color and translucency stability of acrylic and polyamide denture base materials. Material and Methods Thirty two specimens (32 mm x 10 mm x 2.5 mm) from polyamide (Valplast) and PMMA (Vertex Rapid Simplified) denture base materials were made. Eight specimens from each material were immersed in distilled water (control) and 8 were subjected to microwave exposure at 450 W for 3 minutes for a period simulating 224 days of daily disinfection. Linear dimension, color change (ΔE*) and translucency parameter (TP) were measured at baseline and after certain intervals up to 224 cycles of immersion, using a digital calliper and a portable colorimeter. The results were analysed using two-way repeated measures ANOVA to estimate possible differences among predetermined cycles and material type. Regression analysis was also performed to estimate the trend of changes with time. Statistical evaluations performed at a significance level of 5%. Results Data analysis showed significant changes in length at baseline with an increasing number of cycles (p<0.05) and a significant interaction of cycle-material (p<0.001). The ΔΕ* parameter was significantly higher with a higher number of cycles (p<0.001), but it did not vary between materials (p>0.05). TP decreased similarly in both materials following microwave action but in a significantly higher level for Valplast (p<0.001). Conclusions The results indicated that long-term repeated microwaving affects linear dimensional, color and translucency changes of both materials. Differences between PMMA and polyamide material were noted only in dimension and translucency changes.